Hi , im getting blow error when I trying ADMA export . in preview AD outbout syn rule
this my DN string .
I have values in MV for Company and accountName attributes and President give is FIMAM .
also I have modify below attributes export flow from 63 CHR
Title-> Titleto 'Left(Title,63) -> Title
'company -> company' to 'Left(company,63) -> company.
Still no luck .. I was wondering how do we troubleshot this type of issues ?
Hello,
is there a way to provision an attribute on account creation only - like a "fire and forget"-Attribute? I already did some research but within "MapAttributesForExport" there is obviously no method to get the ModificationType, thus I am stuck. Any help is much appreciated.
Regards
Dorian
I've installed and configured a few FIM Sync Service environments in the past and every so often I find the Sync Service, seemingly randomly, starts to "tick", or refresh, at a frequent interval. Restarting the service/server does not stop this - it just seems to continue doing it forever. It makes navigating through run history difficult as every time it refreshes, the operations tab reverts to the top.
Does anyone know what causes this and more importantly how to stop it?
Hello,
I tried the new Microsoft Generic LDAP Connector, but can't see any of the "Auxiliary classes" ... the abstract class "top" is also not in the list of selectable object classes. Any ideas?
BR,
juvi
Hi,
I have a SharePoint connector which is successfully provisioning users which I want to extend to groups, but on an export I'm getting the following error:
An error was encountered saving MemberGroup
Any ideas? Has anyone done an export of groups and can share what attributes they populated?
Thanks,
Mark
Hi,
Recently i changed the list of approvers.
The problem is when people choose an approver, fim remebers the name by default. So next time the approver is automatically selected.
However, when i change the approvers set, the old approver is still selected by default. This means people select an approver who isn't in the approvers set,and create a request that can't be approved. I found out it is possible to enter any resolved name without causing errors..
Is there a way to check if a valid approver is selected before submitting the request? So i can prevent users from selecting invalid approvers?
Thanks,
Hi all,
while im trying to create shared amilbox using FIM portal im getting below error.
EXCEPTION DATACan anybody help please
Hi,
Brief detail about the issue is when FIM trying to delete SMB we are receiving below error. MPR of this delete has WF
which only changes value of Recycle bin attribute to True from false error details are shown below. Can somebody help to find what is wrong with this.
Error processing your request: The operation was rejected because of access control policies.
Reason: The server workflow rejected the operation.
Attributes:
Correlation Id: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXX
Request Id: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXX
Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException() at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.ResourceManagement.Query.QueryParametersGenerator.WriteRequestedAttributes() at Microsoft.ResourceManagement.Query.QueryParametersGenerator.BuildParameterString() at Microsoft.ResourceManagement.Query.QueryProcessor.BuildSqlCommand(Query objectRepresentation, Boolean countResultsOnly) at Microsoft.ResourceManagement.Query.QueryProcessor.ExecuteQuery(Query query, Nullable`1 maximumTime, Boolean& endOfSequence, Boolean countResultsOnly, Int64& resultCount, Int64& executionTime) at Microsoft.ResourceManagement.Data.DataAccess.GetObject(Guid objectId, CultureInfo locale, Guid requestor, String[] attributeNames, Boolean includeInlineRights) at Microsoft.ResourceManagement.Data.DataAccess.GetObject(Guid objectId, String[] attributeNames) at Microsoft.ResourceManagement.ActionProcessor.ActionDispatcher.Read(Guid objectId, CultureInfo locale, Nullable`1 requestor, Nullable`1 resourceTime, String[] requestedAttributes, Boolean includeRights) at Microsoft.ResourceManagement.ActionProcessor.ActionDispatcher.ProcessOutputRequest(RequestType request) at Microsoft.ResourceManagement.WebServices.RequestDispatcher.ExecuteGetAction(RequestType request) at Microsoft.ResourceManagement.WebServices.RequestDispatcher.ExecuteAction(RequestType request) at Microsoft.ResourceManagement.WebServices.RequestDispatcher.ExecuteAction[ResponseBodyType](RequestType request) at Microsoft.ResourceManagement.WebServices.RequestDispatcher.DispatchRequest[ResponseBodyType](RequestType request, Guid requestIdentifier, Object redispatchSingleInstanceKey, Boolean isRedispatch) at Microsoft.ResourceManagement.WebServices.RequestDispatcher.DispatchRequest[ResponseBodyType](RequestType request) at Microsoft.ResourceManagement.Workflow.Hosting.RequestWorkItemProcessor.DispatchRequest[TResponseType](RequestType request, Boolean applyAuthorizationPolicy) at Microsoft.ResourceManagement.Workflow.Hosting.RequestWorkItemProcessor.ProcessGetWorkItem(ReadRequestWorkItem readWorkItem) at Microsoft.ResourceManagement.Workflow.Hosting.RequestWorkItemProcessor.ProcessWorkItem(WorkItem workItem)
Thanks ,Venky
Hello guys,
I am trying to sync objects from eDirectory 8.8.5. Everything works fine, I map inetOrgPerson objects to person objects. I discovered if an inetOrgPerson object has an auxiliary class attached in eDirectory it does not get synchronized into the connector space.
In case it is referenced by another user or group, a placeholder object is created.
When I remove the auxiliary class, the object gets synchronized fine.
Is there a solution/workaround?
I believe I have the latest hotfix rollup installed, 4.1.3599.0
Thanks,
Csaba
Csaba
Hello,
So here is the setup
Only the AD and FIM MA are configured
FIM Portal Declarative Import rule from AD to FIM - with all the standard attributes including phone, mobile, office
FIM Portal Declarative Output rule from FIM to AD - with only phone, mobile, office
FIM MA configured with Import and Export attribute flows for phone, mobile, office
Export only for everything else
Equal precedence configured on phone, mobile and office in FIM Sync
Users will be created in AD outside of FIM
Users need to update their phone, mobile, office using the FIM Portal
What should my run sequence be?
After the initial Full Import loads I can't find an order that will get Delta Import/Delta Sync run profiles to reliably flow changes from the FIM Portal to AD
Ideally I want to capture everything from AD, provision to FIM Portal and then if there are changes in FIM Portal feed these back to AD. If either phone, mobile or office are updated in AD I am happy for the change to be lost... it should be done through the FIM Portal
Hello Everyone,
this is tough one !
so i'm trying to sync my SAP users to my AD users thorugh FIM so that i can reset the password using sspr.
i deployed all that needed to be and used the default wsconfig file to create my sap web service management agent, and this causes imports to fail.
i then noticed that the default wsconfig file has totally different naming conventions and tables than my SAP so i'm thinking i have to forget the default one i create my own ?
anyone can help understand this whole thing ?
thanks !
Hitch Bardawil
Is it possible to add a hyperlink to the FIM 2010 R2 sspr success page after a password reset?
I know you can customize text by modifying the strings.resource file, but I can't seem to add a hyperlink.
If I type out the HTML tag it doesn't work.
Cheers
IT Support/Everything
Hi,
First of all, thanks for the Generic LDAP Connector. It's a great product.
We are using it to integrate to an LDAP v3 compliant LDAP catalog.
However, we are having some issues flowing attributes. Apparently, the connector present a "primary" object class of "inetOrgPerson" to MIM2016 (see attached image). The object in the catalog also has the object class "person".
We need to flow lastName -> sn, but the flow is naturally not done as the object type is "wrong". The object is presented to MIM as inetOrgPerson, and not person which is the object that has the sn attribute in the catalog.
However, the object in the catalog actually has the class person, as well as inetOrgPerson.
Any suggestions? How is this supposed to work?
Thanks!
Did my post help? Please use "Vote As Helpful", "Mark as answer" or "Propose as answer". Thank you!
Hi all,
I hope that someone can help me or address me in the right direction.
I've to configure a management agent for FIM 2010 R2 that allows to communicate with SAP ECC 6.0. I followed the instructions reported in the MS document namedConnector for SAP.docx and I managed to expose the requested web services on SAP side. Now I'm trying to configure the web service management agent on FIM side following the instructions on the document namedConnector for WebServices.docx. (Both documents areavailable for download here).
I managed to discover the SAP web services through the Web Service Configuration Tool. But now I'm stuck...Can anyone explain to me how to configure the Full Import or the Delta Import workflows on the Web Service Configuration Tool. Is there any guidance?
Moreover, when I start the Web Services (Microsoft) Management agent configuration I get the following error. The italian sentence basically means that there was an error while processing the web service...Please consider that the fimuser here displayed has the higher priviledges on SAP and that there are no firewall between FIM and SAP servers...any clue?
Thanks for your help.
Manuele.
Hello All,
I was refreshing schema of file based connector, but getting a synchronization error "Unable to update management agent.
Access denied". However when i am creating a new file based connector using the same domain account it is allowing me to create. kindly suggest.
regards,
Suman
I have a (not very elegant) idea for setting a MV attribute based on the presence of a string in the DN of a user that is being imported.
I got the following from another post, can't remember where. This is a work-around for not having a function that searches for a string within another string. Basically, if the DN contains "sales department", flow "Sales Department" to an
attribute.
IIF(NotEquals(ReplaceString(dn,"Sales department",""),dn),"Sales department","Other department")
That works fine. There are obviously a few departments, so I want to nest the IIF statements.
I would expect this to work:
IIF(NotEquals(ReplaceString(dn,"sales department",""),dn)),"sales department",IIF(NotEquals(ReplaceString(dn,"accounts department",""),dn)),"accounts department","another department"
But it doesn't. When inputting the flow definition, I get "The function IIF is not correctly formatted".
Is there a limitation to nesting of IIF statements in custom expressions?
The other way I can think of to do this is to add a bit of compiled code that references an array of "allowed departments" from a text file.
Many thanks!
John
Regards,
Manuj Khurana
Hi,
Can anyone point me to the hardware requirements for MIM? I'm only able to find it for FIM and not sure if they've changed.
Specifically, I'm looking to see what the SQL hardware requirements are and if a virtual is OK or if we need to order a new server.
Thanks for any help.
Sami