Here I explain simple case .
Object is something like this.
StudentName = "Test" , Branch = "IT", YearOfAdmission = "2015" ,System = [Oracle = "Permission1, Permission2" , AD = "Permission1,Permission3" , SQL = "Permission2,Permission4" ]
This user has can have access to more than one system.
Any help would be appreciable .
Hi,
I have installed MIM 2016 (RTM) with SQL 2010 and SharePoint 2013 SP1.
I installed SharePoint 2013 SP Spanish Language Pack. I could configure SharePoint Central Administration Site in Spanish (Site Setting -> Language Settings) and it worked fine (I changed Internet Explorer language configuration and site language changed).
I could configure MIM Portal language setting too.
I installed MIM Service & Portal, MIM Laguage pack (Spanish) ...
But of I changed Internet Explorer Language configuration, MIM Portal DID NOT change language (but SharePoint did, I can see "Site Actions" in Spanish in right/up corner).
How can I install Language pack in MIM With SharePoint 2013 SP1
Thanks in Advanced
Best regards
JuanCC Technology Specialist
Hello!
I have FIM 2010 R2.
When I connect to FIM Portal from server FIM - all ok.
When I connect to FIM Portal from other server - I can't sign in to the FIM Portal.
Basic auth work correct from the other server.
Help!
Alex
I had to roll back an update which was causing trouble, and rever to FIM version 4.1.3510.0.
Things look ok, but workflows with custom activities are ending in PostProcessingError, and I see this in the event log:
"Forefront Identity Management Service is not able to serialize this XOML definition"
Checking further in the event log, I see
"System.Workflow.ComponentModel: System.Workflow.ComponentModel.Serialization.WorkflowMarkupSerializationException: Could not load file or assembly 'Microsoft.IdentityManagement.WFExtensionInterfaces, Version=4.1.3510.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies."
However, if I check in C:\Windows\Assembly, that DLL is actually there, with the proper version.
Any hints?
Thanks in advance,
Paolo
Paolo Tedesco - http://cern.ch/idm
Hi,
Have deployed SharePoint Foundation 2013 Sp1, and now am trying to install MIM 2016 Service and Portal and get the following error:
"The FIM portal does not support being deployed on a SharePoint web application with claims-based authentication. Please make sure the SharePoint web application is configured with classic-mode authentication"
According to another Microsoft article: "claims-based authentication is the default (in SharePoint Foundation 2013) and preferred method of user authentication". So why is MIM not following Microsoft best practices?
It would be nice if the MIM documentation team would provide us with an answer in order to deploy and test their new product (or update MIM to work according to Microsoft best practices).
Unfortunately this article does not really say enough: https://technet.microsoft.com/en-us/library/jj863242.aspx?f=255&MSPPError=-2147217396
Look forward to hearing some feedback from the team.
Regards,
SK
Let me explain scenario.
I am using only Synchronization service.
Now during import of user object and its roles of user. Role contain information about end system as well.
So for example. If you look at below table it get during import. Now during Export if AD MA is MAName then export only group for user which has SystemName = System1.
| samAccountName | First Name | LastName |
| Test1 | Test | Test |
| Test2 | Test | Test |
| Group1 | ||
| Group2 | ||
| GroupName | SystemName | samAccountName |
| Group1 | System1 | Test1 |
| Group2 | System1 | Test1 |
| Group1 | System2 | Test1 |
Is This possible ? Any help would be appreciable.
Does MIM 2016 support Windows 10? The Microsoft Identity Manager 2016 TechNet page (https://technet.microsoft.com/en-us/library/mt150253.aspx) doesn't
mention it as a supported operation system. However, this blog posting (http://blogs.technet.com/…/microsoft-identity-manager-2016-…)
indicates it does. I'm looking for an official statement.
In regards to browser support, does the MIM Portal still only support IE, or does it now support Chrome or Microsoft Edge?
Thanks,
Marc
Marc Mac Donell, VP Identity and Access Solutions, Avaleris Inc.
http://www.avaleris.com
Dear All,
I have created FIM 2010 environment for synchronizatoin between two different AD forest and i have done all the configuration which is necessary for it but still users are not provisioning in external AD.
If anyone have got step by step document then please share with me and please help me to check all the steps to do this.
Please see the below mentioned steps in which i have done all the steps and if i skipped anything so please let me know.
1- FIM Active Directory Service Agent.
2- FIM MA agent.
3- Synchronization Rules.
4- Management Policy Rules
5 - Work FLows
- FIM ADMA Full Import and Full Sync is working fine
- FIMMA Full Import is working fine
- FIMMA Export is not sending the data to the external AD metaverse.
Regards,
Shakeel Shahid
Hello!
I have 3 test OU in AD. I have 3 MA (FileMA (for csv file), FIM MA (for FIM Service, AD MA (for AD))). User import from FileMA -> FIM Portal -> AD.
I have 3 Sync Rules.
1) For create user in AD - Test OU
2) For add OU - Konstr OU
3) For add OU - Arch OU
User created in AD correct (In Test OU)
When I want change OU - for Konstr OU - OK
When I want change OU - Arch - I can't
Help!
Alex
I have followed TechNet Deploy MIM and have been successful with the initial build. I installed the MIM 2016 Synchronization Service , the MIM Service & Portal and attempted to Create the MIM MA for the FIM Management Service Agent. I get errors "Failed to connect to the specified database". The document states to use the contoso\MIMMA account I created at the beginning of the build along with other service accounts and groups.
I checked the SQL 2014 Standard instance on the same server. It only has two accounts provisioned for MIM (MIMService & MIMSync)
What MIM accounts are required to have logins & roles in SQL?
Is MIMMA the correct account to use for this function?
Thanks, Stu
I am receiving The Microsoft Identity Manager server database could not be successfully populated. when installing the Service and Portal.
In the event logs I get:
Product: Microsoft Identity Manager Service and Portal -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action DeployAndPopulateDatabase, location: C:\Windows\Installer\MSIABAE.tmp, command: installApp=FIM action=DeployAndPopulateDatabase databaseName=FIMService namespaceName="fim" datFilesInstallDir="C:\Program Files\Microsoft Forefront Identity Manager\2010\Service\Data\BL" sqlserverName=IDM01 FIMServiceAccountDomain=Domain FIMServiceAccountName=MIMService SyncServiceAccountDomain=Domain SyncServiceAccountName=MIMSync RunningUserDomain=Domain RunningUserName=DAuser RunningUserEmail= CreateDatabase=True
Both the Service account and the Domain Admin account have mailboxes and email addresses on their AD objects.
I have modified the model DB size as seen in another post about this issue.
Are there any other logs that I can look at to see what is going on?
Thanks for any assistance.
I have questions about the day-to-day operations of users, organizations, roles, well all the objects within BHOLD.
My initial BHOLD structure loaded, was represented and operated well in BHOLD. But, a department hierarchy change occurred and I can't figure out how to make those changes in BHOLD. The core web site doesn't appear to allow for that manipulation. And, the MA syncs (actually, it's the import) are throwing errors about not being able to import exported changes.
How are changes to the structure of an organization handled in BHOLD? i.e. if a new department is created, or the department hierarchy changes. How are those changes accomplished in BHOLD?
How are users that change departments handled?
Is this what the model generator is for?
I'm still trying to define the value of BHOLD for my clients.
Thanks,
Greg Wilkerson
I've been looking over the specs for generating the model files and have discovered a possible an inconsistency in them.
For users:
The doc (https://msdn.microsoft.com/en-us/library/jj134933(v=ws.10).aspx) specs out the primary key for the Users table to be Employee_ID. Yet further down, the sections states:
If a user must be linked to more than one orgunit, different records, one per orgunit, must be created for the user in the user file.
If I follow the specs for the primary key, I'll have to create a new Employee_ID for every additional Org Unit the user is in. This makes no sense to me and makes me wonder if the primary key should be Employee_ID and OU_Key_1.
Any help here?
Greg
I feel stupid having to as this, but:
I have been using the MSDN version of MIM 2016 for my Lab, but now I need to move into production and I can not find where to download the GA release of MIM 2016. I meet the requirements of having MIM 2016 Cals, and Windows Server with SA, but I dont see the server download in my volume license site or anywhere else for that matter.
The MIM site states that:
Microsoft Identity Manager 2016 is licensed on a per-user basis. A Client Access License (CAL) is required for each
user whose identity is managed. A Windows Server license with active Software Assurance is required to use Microsoft Identity Manager 2016’s server software as a Windows Server add-on.
So, where do I download or acquire this "add-on"?
Thanks!
I want to modify a Current Membership Section in a Group Editing RCDC. I want to replace a UocListView with a UocIdentityPicker. The only problem is that I want to show members right when somebody opens a group in a Fim portal.
Is that possible to do?
Hi all
I have several FIM Sync engine installations and currently using Sørens Codeless provisioning FIM.MRE.dll to provision users from one Source AD to another destination AD.
In the destination AD, all the users are Lync enabled based on the presense of an attribute in their userobject. If this attribute is not present the user will not get Lync enabled.
This is what I am trying to achieve:
Does anyone have any clue how to make this powershell script trigger based on the fact that the user is disconnected from the Source AD?
And as I described, I'am not using FIM service in this installation.
BR Andre
Andre
Hi,
There is a simple HR Maintenance program used in the Ramp Up Virtual labs here:
http://technet.microsoft.com/en-us/forefront/ff793470
Is this program available to download? The exe name is HRMaintenance.exe.
The virtual labs are all well and good, but they take a while to load and you only have limited time before they expire. It would be nice to be able to create our own duplicates of these labs for testing\learning. The FIM & SQL config can be duplicated, this HR tool cannot (easily).
Many thanks.
Hi All,
We have FIM 2010 R2 SP1 [Version 4.1.3451.0]. Does it supportsSQL Server 2012 SP2?
We could find it support SQL 2012 from below blog. But we are looking for information on whetherSQL 2012SP2 versionis supported or not?
Can anyone help with this details?
Thanks in advance!
Aswathy Raj
Just checking to see if this is the case. If yes, are Group Managed Service Accounts supported (server 2012)? Or only standalone. If not, is it a feature currently under consideration?
TIA,
James
